Advanced Well Drilling and Completion Optimization Training Course for Petroleum Engineers

Module 1: Integrated Well Planning and Geomechanical Modeling

ü  Principles of integrated well construction optimization and lifecycle planning

ü  Constructing 1D and 3D mechanical earth models (MEM) from log and seismic data

ü  Trajectory design optimization to minimize tortuosity and operational risk

ü  Offset well data analysis and historical drilling hazard identification

ü  Practical Session: Building a Pre-Drill Geomechanical Window and Casing Seat Selection Chart

Module 2: Drill Bit Selection, ROP Optimization, and Rock Mechanics

ü  Rock mechanics fundamentals: Unconfined compressive strength (UCS) and rock drillability

ü  PDC and Roller Cone bit selection using IADC classification and cutter technology

ü  Mechanical Specific Energy (MSE) monitoring for real-time ROP optimization

ü  Identifying bit dull characteristics and cutter wear patterns for continuous improvement

ü  Practical Session: Real-Time MSE Calculation Exercise to Identify Inefficient Drilling Mechanics

Module 3: Drilling Fluids Engineering and Hydraulics Optimization

ü  Rheological properties of Water-Based (WBM), Oil-Based (OBM), and Synthetic-Based Mud (SBM)

ü  Equivalent Circulating Density (ECD) management in narrow mud weight windows

ü  Hole cleaning mechanics in high-angle and horizontal wellbores

ü  Hydraulics optimization: Nozzle sizing, pressure drop calculations, and bit hydraulics

ü  Practical Session: Designing an Optimal Hydraulics and Nozzle Configuration for Cuttings Transport

Module 4: Drillstring Mechanics, Torque and Drag, and Vibration Control

ü  Drillstring design principles: Tension, collapse, burst, and combined stress limits

ü  Modeling torque and drag forces in directional and extended-reach wells

ü  Drillstring vibration phenomena: Axial bounce, torsional stick-slip, and lateral whirl

ü  Selecting downhole tools, jars, shock subs, and stabilizers to mitigate vibration

ü  Practical Session: Running a Torque and Drag Analysis to Predict Buckling and Hook Load Limits

Module 5: Wellbore Stability, Pore Pressure, and ECD Management

ü  Causes of wellbore instability: Mechanical stress, chemical interactions, and thermal effects

ü  Pore pressure estimation methods using Eaton and Bowers techniques

ü  Managing lost circulation, differential sticking, and ballooning mechanisms

ü  Managed Pressure Drilling (MPD) techniques for drilling narrow pressure margins

ü  Practical Session: Simulating Wellbore Collapse vs. Fracture Gradients to Set Safe Mud Weight Margins

Module 6: Directional, Horizontal, and Extended Reach Drilling (ERD)

ü  Rotary Steerable Systems (RSS) vs. Conventional Mud Motors: Application and economics

ü  Wellbore positioning, survey calculations, and MWD/LWD sensor placement

ü  Tortuosity control and hole cleaning strategies in ERD and multilateral wells

ü  Geological steering and real-time formation evaluation techniques

ü  Practical Session: Designing a Complex Horizontal Well Trajectory with RSS steering targets

Module 7: Casing Design, Cementing Operations, and Well Integrity

ü  Casing seat depth selection based on pore pressure and fracture gradient profiles

ü  Casing stress calculations under burst, collapse, tensile, and thermal loads

ü  Primary cementing design: Slurry design, displacement mechanics, and mud removal

ü  Evaluating cement bond quality using CBL/VDL logs and ultrasonic integrity tools

ü  Practical Session: Performing a Combined Stress Load Casing Design Calculation for Deep Wells

Module 8: Advanced Well Completion Systems and Reservoir Stimulation

ü  Open-hole vs. cased-hole completions: Selection criteria based on reservoir characteristics

ü  Tubing stress analysis under production, injection, and shut-in temperature changes

ü  Perforating strategy optimization: Charge selection, shot density, and underbalance targeting

ü  Hydraulic fracturing and acid matrix stimulation integration during well completion

ü  Practical Session: Selecting Upper and Lower Completion Components for a High-Pressure Reservoir

Module 9: Sand Control, Intelligent Completions, and Multilateral Wells

ü  Sand production prediction and evaluation of sand control methodologies

ü  Design and installation of gravel packs, standalone screens, and expandable screens

ü  Intelligent completion systems: Inflow Control Devices (ICD) and Autonomous ICDs (AICD)

ü  Multilateral well architectures (TAML levels 1 through 6) and junction isolation

ü  Practical Session: Designing a Lower Completion Gravel Pack System for Unconsolidated Formations

Module 10: Rig-Site Risk Management, NPT Reduction, and Performance Tracking

ü  Identifying, tracking, and eliminating Invisible Lost Time (ILT) and Non-Productive Time (NPT)

ü  Root cause analysis methodologies for stuck pipe, well control, and equipment failure incidents

ü  Well construction performance metrics: Technical Limit drilling and Flat Time reduction

ü  Post-well appraisal, lessons learned capture, and continuous learning feedback loops

ü  Practical Session: Conducting a Technical Limit Workshop and NPT Root-Cause Analysis for a Drilling Incident

About Our Trainers

Our training courses are facilitated by distinguished drilling and completion engineers, certified well control instructors, and veteran offshore drilling superintendents. Each trainer brings over 20 years of hands-on technical and operational experience directing onshore, offshore, and deepwater well construction projects for major international oil companies (IOCs) and national oil companies (NOCs). Holding advanced degrees in Petroleum or Mechanical Engineering, our instructors combine deep technical expertise with practical rig-site execution knowledge.

Quality Statement

Phoenix Training Center is committed to delivering world-class, outcome-oriented professional development programs. Our curriculum is continuously reviewed and updated by industry experts to align with evolving regulatory standards, technological advancements, and international clinical trial best practices. We adhere to stringent quality control mechanisms to ensure our interactive methodologies, training materials, and practical sessions deliver measurable organizational impact and enhanced professional competence.

Tailor-Made Courses

We understand that every organization has unique challenges and opportunities as well as unique training needs. Phoenix Training Center offers tailor-made courses designed to address specific requirements and challenges faced by your team or organization. Whether you need a customized curriculum, a specific duration, or on-site delivery, we can adapt our expertise to provide a training solution that perfectly aligns with your objectives. We can customize this Course to focus on your industry, specific risk profile, or internal stakeholder dynamics. Contact us to discuss how we can create a bespoke training program that maximizes value and impact for your team. For further inquiries, please contact us on Tel: +254720272325 / +254737296202 or Email: training@phoenixtrainingcenter.com.

Admission Criteria

ü  Participants should be reasonably proficient in English.

ü  Applicants must live up to Phoenix Center for Policy, Research and Training admission criteria.

Terms and Conditions

ü  Discounts: Organizations sponsoring Four Participants will have the 5th attend Free.

ü  What is catered for by the Course Fees: Fees cater for all requirements for the training – Learning materials, Lunches, Teas, Snacks and Certification. All participants will additionally cater for their travel and accommodation expenses, visa application, insurance, and other personal expenses.

ü  Certificate Awarded: Participants are awarded a Certificate of Completion at the end of the training.

ü  Course Improvement: The program content shown here is for guidance purposes only. Our continuous course improvement process may lead to changes in topics and course structure.

ü  Approval of Course: Our Programs are NITA Approved. Participating organizations can therefore claim reimbursement on fees paid in accordance with NITA Rules.

Booking for Training

Kindly send an email to the Training Officer on training@phoenixtrainingcenter.com and we will send you a registration form. We advise you to book early to avoid missing a seat to this training. Or call us on +254720272325 / +254737296202.

Payment Options

We provide 3 payment options, choose one for your convenience, and kindly make payments at least 10 days before the Training start date to reserve your seat:

ü  Groups of 5 People and Above: Cheque Payments to: Phoenix Center for Policy, Research and Training Limited should be paid in advance, 10 days to the training.

ü  Invoice: We can send a bill directly to you or your company.

ü  Deposit directly into Bank Account: (Account details provided upon request)

Cancellation Policy

ü  Payment for all courses includes a registration fee, which is non-refundable, and equals 15% of the total sum of the course fee.

ü  Participants may cancel attendance 14 days or more prior to the training commencement date.

ü  No refunds will be made 14 days or less before the training commencement date. However, participants who are unable to attend may opt to attend a similar training course at a later date or send a substitute participant provided the participation criteria have been met.

Accommodation and Airport Pick-Up

For physical training attendees, we can assist with recommendations for accommodation near the training venue. Airport pick-up services can also be arranged upon request to ensure a smooth arrival. Please inform us of your travel details in advance if you require these services. For reservations contact the Training Officer on Email: training@phoenixtrainingcenter.com or on Tel: +254720272325 / +254737296202.